Specifications

Page 12
Online Support at www.digisender.net
DG440 DigiSender™ X7
STEP 5
Using the DigiSender™ X7
STEP 1
STEP 2
STEP 3
Select the SCART channel on the second television
using the televisions remote control. Look for a
button labelled AUX, AV, VIDEO, VCR or .
Switch on the source equipment such as your
satellite receiver or DVD player.
Select the correct source device using the
supplied remote control pointed at the
DigiSender™ receiver - see opposite.
The DigiSender™X7 is designed to be
simple to use once set up.
The supplied remote control can be
used to switch between sources, such
as Satellite/Cable, DVD and VCR.
STEP 4
Use your original source equipment remote control
to control what channel you watch or your DVD
player or VCR.
2nd TV
REMOTE
CONTROL
DIGISENDER
REMOTE
CONTROL
SOURCE
REMOTE
CONTROL
LIVING ROOM
BEDROOM
BEDROOM
BEDROOM
Page 13
Please read this instruction manual carefully prior to installation
DG440 DigiSender™ X7
continued...
Transmitter Source Select Controls.
The POWER button toggles the
DigiSender transmitter and receiver
mode between STANDBY and ON. The
power LED indicates the current mode
- GREEN for ON, RED for STANDBY.
Press 1,2,3 or 4 with the remote
pointing at your receiver, to select a
device connected to your DigiSender™
transmitter. For example you could
switch between your satellite/cable,
DVD, VCR and CCTV camera from your
bedroom.
1 = DigiConnector 1
2 = DigiConnector 2
3 = RCA Input 3
4 = RCA Input 4
Please use your original or compatible
remote controls to control your source
equipment. The supplied remote
control cannot be used to achieve
this.