Installation guide
11
On the base:
tAt the same time, press and hold the
key for about 5 seconds or until it beeps, to indicate the base is
in registration mode.
tA confirmation beep is played to indicate successful registration, and the handset returns to idle mode
with its handset number displayed and the antenna icon steady.
If registration fails, the handset beeps and the display returns to show “REGISTER” and the antenna icon
continues to flash.
12 GUARANTEE AND SERVICE
The phone is guaranteed for 24 months from the date of purchase shown on your sales receipt. This
guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect,
faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or
repair other than through approved agents.
Please keep your sales (till) receipt this is your proof of guarantee.
12.1 While the unit is under Guarantee
tDisconnect the base unit from the telephone line and the mains electricity supply.
tPack up all parts of your phone system, using the original package.
tReturn the unit to the shop where you bought it, making sure you take your sales receipt.
tRemember to include the mains adapter.
12.2 After the Guarantee has expired
If the unit is no longer under Guarantee, contact us via www.aegtelephones.eu
This product works with rechargeable batteries only. If you put nonrechargeable batteries in the handset
and place it on the base, the handset will be damaged and this in NOT covered under the warranty
conditions.
13 TECHNICAL DETAILS
Standard Digital Enhanced Cordless Telecommunication (DECT)
1.88 to 1.9 GHz (bandwidth = 20 MHz)
Channel bandwidth 1.728 MHz
Operating range Up to 300m outdoors; Up to 50m indoors
Operating time Standby: 100 hours, Talking: 10 hours
Battery charge time:15 hours
Temperature range Operating 0° C to 40° C, Storage -20° C to 60° C
Electrical power Base unit:
input 100-240VAC 50/60Hz 150mA, output 6VDC 450mA
Charger unit:
input 100-240VAC 50/60Hz 150mA, output 6VDC 450mA