Owner manual

16
7.10.4 Delete all redial list entries
tFollow steps 1 and 2 in section “7.10.1 Redial a number from the redial
list”.
tPress
and / to select “DEL ALL”.
tPress
O
K
to display “CONFIRM?”.
tPress
O
K
again to confirm.
>All entries will be deleted and the display will show “EMPTY”.
7.11 Find the handset
You can locate the handset by pressing the find key
on the base
station. All the handsets registered to the base will produce the paging
tone and show “PAGING“ on the screen.
You can stop the paging by pressing
, or on any handset or on
the base again.
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
7.12 Make an internal call
make internal calls, transfer external calls from one handset to another
handset and make conference calls.
If the called handset is not answered within 60 seconds, the called handset
will stop ringing and the calling handset will return to standby mode.
Note:
If only one handset is registered to the base station, when
is pressed,
it will display “FAILED”.
7.12.1 Intercom another handset
tIn idle mode, press
and all the other registered handset numbers
will display, alone with a “9”.
tEnter the number of the handset that you want to call, or enter 9 to call
all handsets.
tThe called handset rings. Press
on the called handset to establish the
internal call.
Note:
If only two handsets are registered to the base station, pressing
will
call the other handset immediately.