User manual

12. TROUBLESHOOTING

Problem Possible solution

You cannot activate the appliance. Make sure that the mains plug is connected

to the mains socket.

Check fuse in fuse box (domestic installa-

tion).

The programme does not start. Press Start/Pause.

Make sure that the appliance door is closed.

The appliance door does not close. Make sure that the installation of the filter is

correct.

Make sure that the laundry is not caught be-

tween the appliance door and the rubber

seal.

The appliance stops during operation. Make sure that the water container is emp-

ty. Press Start/Pause to start the programme

again.

Load is too small, increase the load or use

the Zeitprogramm (Time Drying) pro-

gramme.

The cycle time is too long or unsatisfactory

drying result.

Make sure that the weight of the laundry is

suitable for the duration of the programme.

Make sure that the filter is clean.

The laundry is too wet. Spin the laundry in

the washing machine again.

Ensure that the room temperature is higher

than +5°C and lower than +35°C. Optimal

room temperature is 19°C to 24°C.

Set the Zeitprogramm (Time Drying) or the

Extratrocken (Extra Dry) programme.

The display shows .

If you want to set a new programme, deacti-

vate and activate the appliance.

Make sure that the options are suitable for

the programme.

The display shows Error code (e.g. E51). Deactivate and activate the appliance. Start

a new programme. If the problem occurs

again, contact the Service centre.

After maximum 5 hours, the programme ends automatically.

It can happen that some area remains humid when drying big items (e.g. bed sheets ).