User manual

Programme Spun at / residual humidity Drying time
Energy
consump-
tion
Iron Dry (Strijkdroog) 1400 rpm / 50% 103 min. 1,47 kWh
1000 rpm / 60% 117 min. 1,68 kWh
Synthetic (Synthetica) 3,5 kg
Cupboard Dry (Kast-
droog)
1200 rpm / 40% 57 min. 0,64 kWh
800 rpm / 50% 65 min. 0,72 kWh
7. OPTIONS
7.1 Anti-crease (Anti-kreuk)
Extends anti-crease phase (30 minutes) at
the end of the drying cycle to 90
minutes. This option prevents laundry
from creases. Laundry can be removed
during the anti-crease phase.
7.2 Buzzer (Zoemer)
When the buzzer option is activated you
can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer option is by default always
on. You can use this function to activate
or deactivate the sound.
You can activate the Buzzer
(Zoemer) option with all
programmes.
7.3 Time Dry (Tijd)
Operates only with the Time (Tijd)
programme. Lets the user to set special
time of drying programme from
minimum 10 min. to maximum of 2 hours
(in 10 min. steps).
7.4 Delay Start (Startuitstel)
Lets to delay the start of a
drying programme from
minimum of 30 minutes to
maximum of 20 hours.
1. Set the drying programme and
options.
2. Push the Delay Start (Startuitstel)
button again and again.
the necessary time of the delay come
into the view on the display (e.g.
if the programme has to start after 12
hours.)
3. To activate the Delay Start
(Startuitstel) option, push the Start/
Pause (/Pauze) button. The time to
start decreases on the display.
8. BEFORE FIRST USE
Before you use the appliance for the first
time do these operations:
• Clean the tumble dryer drum with a
moist cloth.
• Start a short programme (e.g. 30
minutes) with moist laundry.
At the beginning of drying
cycle (3-5 min.) there could
be a slightly higher sound
level. It is because of start of
the compressor that is
normal for compressor
powered appliances such:
refrigerators, freezers.
www.aeg.com12