User manual

11
Die Teile A, B, C, D abtrennen, wie
in der Abb. gezeigt wird.
PR266
A
B
C
D
Die Schiene (A) auf der Innensei-
te der Möbeltür oben und unten
auflegen (siehe Abb.) und die
Position der Bohrlöcher anzeich-
nen. Nachdem die Löcher
gebohrt wurden, die Schiene mit
den mitgelieferten Schrauben
befestigen.
20 mm
A
50mm
PR166
Die Abdeckung (C) in die Schiene
(A) eindrücken, bis sie einrastet.
PR33
C
A
34
180°
Reversibility of the freezer door
Electrical connection
Before initial start-up, refer to the appliance rating plate to ascertain if sup-
ply voltage and current values correspond with those of the mains at the
installation location.
e.g.: AC 220 ... 240 V 50 Hz or
220 ... 240 V~ 50 Hz
(i.e. 220 to 240 volts alternating current, 50 Hertz)
The rating plate is inside the appliance on the left.
A correctly installed, earthed socket is required for the electrical supply. The
supply must have a fuse rating of at least 10 Amps.
If the socket is not accessible once the appliance is built in, the electrical
installation must include suitable means of isolating the appliance from the
mains (e.g. fuse, cut-out, current trip or similar with a minimum contact
separation of 3 mm).
Attention: The mains connection cable may only be replaced by a skilled
electrician. Please contact your dealer or our customer service department
for repairs.