User manual
• Loosen and remove the lower pin.
On the opposite side:
• Tighten the lower pin.
• Install the lower door.
• Tighten the middle hinge.
• Install the spacer.
• Install the upper door.
• Tighten the upper pin.
7.5 Ventilation requirements
5 cm
min.
200 cm
2
min.
200 cm
2
The airflow behind the appliance must
be sufficient.
7.6 Installing the appliance
CAUTION!
Make sure that the mains cable
can move freely.
Do the following steps:
x
x
If necessary cut the adhesive sealing
strip and apply it to the appliance as
shown in figure.
18
www.aeg.com