User manual

1
2
3
6
5
4
• Remove the handle. Unscrew the top
handle bracket from the handle rod
(1).
• Unscrew the bottom handle bracket
from the door .(2)
• Remove the handle.
• Unscrew the top handle bracket from
the door (3).
• Re-screw the handle bracket on the
door (4).
• Turn the handle bracket with the han-
dle and screw them to the door (5)
and the fitted handle bracket (6).
•
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cab-
inet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact
the nearest After Sales Service Force.
The After Sales Service specialist will car-
ry out the reversibility of the doors at
your cost.
9. TECHNICAL DATA
Dimension
Height 1850 mm
Width 595 mm
Depth 658 mm
Voltage 230-240 V
Frequency 50 Hz
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.
18
www.aeg.com