User manual

5.5 Hints for temperature
inside the fridge
• A suitable temperature inside the
fridge is approx. +5° C. When the
temperature regulator is set to +5° C
this represents the mean temperature
in the fridge. It is normal with higher
temperature in the top of the fridge
and lower in the bottom. If the
temperature regulator is set to a cold
temperature, the ambient
temperature is high or if the fridge is
fully loaded the compressor will run
for a longer time. If too cold, change
to a higher temperature setting.
CAUTION!
Do not place food
against or close to the
temperature sensor (A).
This can result in too cold
temperatures.
A
• If you want to check the temperature
of food stored in the refrigerator,
place a glass of water centrally in the
cabinet, and put a proper
thermometer with an accuracy of +/–
1 °C into it. After 6 hours the
temperature can be monitored. The
measuring shall be performed under
steady-stated conditions (without
changing the load).
6. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
6.1 General warnings
CAUTION!
Unplug the appliance before
carrying out any
maintenance operation.
This appliance contains
hydrocarbons in its cooling
unit; maintenance and
recharging must therefore
only be carried out by
authorized technicians.
The accessories and parts of
the appliance are not
suitable for washing in a
dishwasher.
6.2 Periodic cleaning
CAUTION!
Do not pull, move or
damage any pipes and/or
cables inside the cabinet.
CAUTION!
Take care of not to damage
the cooling system.
CAUTION!
When moving the cabinet,
lift it by the front edge to
avoid scratching the floor.
The equipment has to be cleaned
regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral
soap.
2. Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser
and the compressor at the back of
the appliance with a brush.
ENGLISH
29