Operation Manual

180°
Unscrew the handle. Remove the plug with
a punch. Install the handle and the plug on
opposite side. Take from the accessory bag
the two plugs and cover the holes left open
after having removed the handle.
Make sure that the front board of the door
is parallel to the front board of the top.
Reposition, level the appliance, wait for at
least four hours and then connect it to the
power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cab-
inet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
8. NOISES
There are some sounds during normal
running (compressor, refrigerant circula-
tion).
BRRR!
HISSS!
CLICK!
BLUBB!
CRACK!
SSSRR
R!
OK
CLICK!
CLICK!
SSSRRR!
SSSRRR!
26
www.aeg.com