User manual

83
What to do if ...
Correcting Malfunctions
Perhaps a malfunction has been caused by a minor error, which you can
correct yourself with the help of the following instructions. Do not
attempt any further repairs if the following instructions do not help in
each specific case.
1
Warning! Refrigerators/freezers may only be repaired by trained
personnel. Repairs carried out by untrained personnel can lead to
substantial danger for the user. Please contact your dealer or our
customer service department for repairs.
Malfunction Possible cause Remedy
Appliance does not
function, green stand-by
display and temperature
display are not lit.
Appliance is not switched
on.
Switch appliance on.
Mains plug is not inserted
or is loose.
Insert mains plug.
Fuse has blown or is defec-
tive.
Check fuse, replace if
necessary.
Mains socket is defective.
Mains malfunctions are to
be corrected by an electri-
cian.
Appliance does not
function, green stand-by
display is not lit, tempera-
ture is indicated as blinking
display, audible warning
sounds at regular inter-
vals.
1)
Mains interruption
warning.
1)
Please check to see if the
mains plug is inserted or if
the fuse has blown (see
also section: "Control and
Information Systems").
Red warning display blinks,
audible warning sounds,
temperature display indi-
cates an error (F1, F2, etc.).
A functions error has
occurred.
Switch the audible warning
off by pressing the
WARNING OFF button.
Please make a note of the
indicated error and inform
the customer service
department. Do not open
the appliance door again.
1) not included with all models