User manual

9
Vorgehensweise
1. Sockelblende (D) nach vorn
abziehen.
2. Türlagerabdeckung (F) von links nach
rechts umsetzen.
3. Unteres Türlager (E) abschrauben.
4. Kühlraumtür nach unten abnehmen.
5. Mittleres Türlager (H) abschrauben.
6. Gefrierraumtür nach unten
abnehmen.
7. Oberen Türlagerzapfen (D)
abschrauben und auf gegenüber-
liegenden Seite montieren.
8. Abdeckstöpsel für die Bohrlöcher
von links nach rechts umsetzen.
9. Gefrierraumtür in oberen Tür-
lagerzapfen einsetzen und schließen.
10. Mittleres Türlager (H) unten links in
die Gefrierraumtür einsetzen und am
Gehäuse festschrauben.
11. Kühlraumtür in mittleres Türlager
einsetzen und schließen.
12. Unteres Türlager (E) unten links in die
Kühlraumtür einsetzen und am
Gehäuse festschrauben.
13. Sockelblende (D) aufsetzen.
14. Türgriffe abschrauben und auf
gegenüberliegender Seite befestigen.
Dazu mit einem Vorstecher die Plas-
tikstöpsel auf der gegenüberliegen-
den Seite vorsichtig in die Tür ein-
schlagen. Mit den im Beipack enthal-
tenen Plastikstöpseln die auf der
alten Griffseite freigewordenen
Löcher verschließen.
D
D590
F
D
PR185
F
F
E
F
H
36
We particulary recommend that you peridically clean the defrost-water
drainage outlet, located in the center of the drainage groove in the refrige-
rator compartment, to prevent the defrost water form overflowing on to
foods stored in the compartment. Use a special cleaner provided, which you
will find already inserted into the discharge hole.
Freezer
The freezer compartment, however, will become progrssively covered with
frost. This should be removed with the special plastic scraper provided, whe-
never the tickness of the frost exceeds 4 mm. During this operation it is not
necessary to switch off the power supply or to remove the foodstuffs.
However when the ice becomes very thick on the inner liner, complete
defrosting should be carried out as follows:
1. Remove the frozen food from the freezer, wrap it in several layers of new-
spaper and put it in a very cool place.
2. Switch off the appliance and pull out
the plug, or remove or unscrew the
safety fuses.
3. Leave the freezer compartment door
open.
4. Insert the plastic scraper into the
recess provided under the defrost
water channel and place a collecting
basin under it.
5. Once defrosting is completed keep
the scraper for future use;
6. Turn the thermostat knob to the
required setting or replace the plug
in the power socket.
Warning!
Never use metal tools to scrape off the frost
Do not use a mechanical device or any artificial means to speed up the
thawing process other than those recommended by the manufacturer.
A temperature rise of the frozen food packs, during defrosting , may shor-
ten their safe storage life.
D068