User's Manual

The warranty does not apply to damage caused by non-

compliance with these instructions (such damage also

includes damaging the warranty seal). AEG will accept no

liability for consequential damage. AEG reserves the right to

rescind all obligations such as warranty agreements, service

contracts, etc. entered into by AEG and its representatives

without prior notification in the event of maintenance and

repair work being carried out with anything other than original

AEG spare parts or spare parts purchased by AEG.

Handling

PROTECT C. is designed and constructed so that all

necessary steps for start-up and operation can be performed

without any internal manipulation of the unit. Maintenance and

repair work may only be performed by trained and qualified

personnel.

Illustrations are provided to clarify and facilitate certain steps.

If danger to personnel and the unit cannot be ruled out in the

case of certain work, it is highlighted accordingly by

pictograms explained in chapter 3.

Hotline

If you still have questions after having read these operating

instructions, please contact your dealer or our "Hotline":

Tel.: ++49 (0)180 5 234 787

Fax: ++49 (0)180 5 234 789

Internet: www.aegpartnernet.com

No part of these operating instructions may be transmitted,

reproduced and/or copied by any electronic or mechanical

means without the express prior written permission of AEG.