User Manual
Table Of Contents
- 1. Safety instructions
- 5. Making Coffee
- DURING USE
- FOR INSTALLATION AND SERVICING
- SOME HINTS OF ENVIRONMENTAL PROTECTION
- Appliance Packaging Information
- All materials are environmentally sound. The plastics can be recycled and are identifìed as follows:
- >PE< for polyethylene, e.g. the outer covering and the bags in the interior.
- >PS< for polystyrene foam, e.g. thè pads, which are ali free of chlorofluorocarbon.
- The carton parts are made from recycled paper and should be disposed of at a waste-paper recycling collection location.
- • Use an authorised disposal site.
- Contact your Local Council or Environmental Health Office to see if there
- ELECTRICAL CONNECTION
- PERMANENT CONNECTION
- 6 HOT WATER
- 7 STEAM
- 8 PROGRAMMING THE AMOUNT OF COFFEE BEANS TO BE GRINDED
- 9 PROGRAMMING THE VOLUME OF COFFEE DISPENSED IN THE CUP
- 11 SIGNAL AND ALARMS
- 12 COFFEE MENUS
- ITALIAN CAPPUCCINO
- VIENNESE CAPPUCCINO
- COLD ESPRESSO SHAKE
- IRISH COFFEE
- 13 CLEANING
- OUTER PARTS
- STEAM NOZZLE
- DRIP TRAY
- Pull open the door and remove the drawer and empty it.
- Replace the drawer and close the door. Replace the drip tray.
- WATER RESERVOIR
- CLEANING CYCLE OF THE BOILER
- BUILDING-IN
![](/manual/aeg/pe9038m/user-manual-english/images/img-32.png)
• Τhey should be used
to compensate for the internal
width of the compartment,
leading to a width of 560/570
mm.
• Fix the U base plate inserting 4 self-
threading screws into the 4 front holes
of the same plate. Then screw the
telescopic runners to each side with the
remaining 8 self-threading screw.
• Insert the machine into the
housing by coupling the machine
to the runners fixed to the sides
of the carcass.
32/35