User manual

9/23
temperature indicator will be ON
(B-26).
• Wait until both of them will be out
(I/2). Push the steam button
again in order to stop producing
steam (B-23).
• To check if the steam has been
produced push again the steam
button (I/3); if the water
temperature indicator l(B-26)
remains out it means that steam
is ready to come out.
• Put under the steam pipe (A-2) a
container with the liquid that has
to be warmed .
• Turn the steam knob counter-
clockwise (B-18)
• Wait until the liquid becomes
warm.
• Close the steam knob (B-18)
• Attention: never make coffee
when the steam is ready to
come out, if this is the case,
reset the water level in the
boiler as explained in the next
point.
• Attention: after every steam
emission push the hot water
button (B-22) without
opening the steam knob (B-
18) (in this way the water
level in the boiler will be
reset).
HOW TO PREPARE CAPPUCCINO’S
FOAM
• Press once the steam button
(I/1); both the steam indicator (B-
29), and the water temperature
indicator will be ON (B-26).
• Wait until both of them will be out
(I/2). Push the steam button
again in order to stop producing
steam (B-23).
• To check if the steam has been
produced push again the steam
button (I/3); if the water
temperature indicator (B-26)
remains out it means that steam
is ready to come out.
• Put under the steam pipe (A-2) a
container with the milk that has to
be warmed .
• Turn the steam knob counter-
clockwise (B-18)
• While the steam is coming out
move the container up and down,
until the milk will produce the
right foam for your cappuccino.
• Close the steam knob (A-18)
• Attention: never make coffee
when the steam is ready to
come out, if this is the case,
reset the water level in the
boiler as explained in the next
point.
• Attention: after every steam
emission push the hot water
button (B-22) without
opening the steam knob (B-
18) (in this way the water
level in the boiler will be
reset).