Washer User Manual

Instructions for use

Starting the wash program

0 1. Checking whether the water tap is open.

2. Starting the wash programme: Press the

START/PAUSE (START/PAUZE, MARCHE /PAUSE)

button.

The wash programme is started or starts after

end of the set delay time.

If the DOOR/LIGHT (DEUR/LICHT, PORTE/ECLAIR.) display lights up red

when pressing the START/PAUSE (START/PAUZE, MARCHE /PAUSE) but-

ton, then the door is not properly closed. Press the door firmly closed

and press the START/PAUSE (START/PAUZE, MARCHE /PAUSE) button

again.

For a set delay time:

the set delay time runs out, in the multi-display the remaining time up

to the start of the programme is displayed (always in full hours). During

this time, you can add washing or change the delay time or abort.

• Adding washing: Press the START/PAUSE (START/PAUZE, MARCHE /

PAUSE) button. The door can be opened. Then close the door and

press the START/PAUSE (START/PAUZE, MARCHE /PAUSE) button

again.

• Changing the delay time or aborting: Press the DELAY TIMER (START-

TIJDKEUZE, DEPART DIFFERE) button until the desired time is dis-

played; With a display of the programme duration (display in

minutes, e. g. 120) the wash programme starts immediately.