User manual

10.10 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the button 启动/暂停.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button 启动/暂停 again.
The washing programme continues.
10.11 Cancelling a running
programme
1. Press the button 开/关 to cancel the
programme and to deactivate the
appliance.
2. Press the button 开/关 again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase. The
water and the detergent are
not drained out in order to
avoid waste. The display
shows the maximum
duration of the programme,
updating it about 20 minutes
after the starting of the new
programme.
10.12 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
1. Touch the button 启动/暂停.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the button
启动/暂停.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete, or set 脱水/
排水 programme/option and than
press 启动/暂停 button.
10.13 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the 启动/暂停 button
goes off.
The door unlocks and the indicator
goes off.
flashes at the end of the
programme in case of overloaded drum.
1. Press the 开/关 button to deactivate
the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
ENGLISH 27