User manual

Drying
17
0 If required, select the button AUDIBLE SIGNAL
(ZOEMER), SPECIAL CARE (LAGE TEMP.), QUICK DRY
(KORT).
• AUDIBLE SIGNAL (ZOEMER) button
During the crease-protection phase (immediately after the drying
process), an acoustic signal is sounded at certain intervals (see "End of
drying process").
• SPECIAL CARE (LAGE TEMP.) button
This program operates with reduced heat. Press the SPECIAL CARE
(LAGE TEMP.) button for fabrics bearing the care symbol S. Gentle
drying is advisable for heat-sensitive fabrics (such as acrylic and vis-
cose). The SPECIAL CARE (LAGE TEMP.) button has no effect if the
QUICK DRY (KORT) button has already been pressed.
• QUICK DRY (KORT) button
The selected programme runs on a shortened programme to produce
the same degree of drying. The QUICK DRY (KORT) button cannot be
used with COTTONS DAMP (KATOEN STRIJKDROOG
c
), HAND IRON
(STRIJKDROOG
b
) and MACHINE IRON (MANGELDROOG) programmes
or with the DELICATES DAMP (MENGWEEFSELS STRIJKDROOG
c
) pro-
gramme. The QUICK DRY (KORT) button has no effect if the SPECIAL
CARE (LAGE TEMP.) button has already been pressed.
Start time pre-selection
With the start time pre-selection you can program the start delay of
the drying program in the range from 1 to 19 hours.
0 Setting the program.
0 Hold the DELAY TIMER (STARTTIJDKEUZE) button
depressed
until the desired number of hours of delay
of the program start appears in the display
field for PROG. TIME (LOOPTIJD).
0 Press the START/PAUSE (START/PAUZE) button.
After elapse of the set number of hours the dryer automatically starts
the set drying program. The PROG. TIME (LOOPTIJD) display field shows
the number of hours after which the drying program will start.
You can correct the pre-selected start delay time at any time.