User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. INSTALLATION
- 4. ACCESSORIES
- 5. PRODUCT DESCRIPTION
- 6. CONTROL PANEL
- 7. DIAL AND BUTTONS
- 8. PROGRAMMES
- 9. SETTINGS
- 10. BEFORE FIRST USE
- 11. DAILY USE
- 11.1 Activating the appliance
- 11.2 Loading the laundry
- 11.3 Filling the detergent and additives
- 11.4 Check the position of the flap
- 11.5 Setting a programme
- 11.6 Starting a programme
- 11.7 Starting a programme with the delay start
- 11.8 The ProSense load detection
- 11.9 Programme phase indicators
- 11.10 Interrupting a programme and changing the options
- 11.11 Cancelling a running programme
- 11.12 Opening the door - Adding garments
- 11.13 End of the programme
- 11.14 Draining water out after end of cycle
- 11.15 Stand-by option
- 12. HINTS AND TIPS
- 13. CARE AND CLEANING
- 14. TROUBLESHOOTING
- 15. CONSUMPTION VALUES
- 16. TECHNICAL DATA
- 17. QUICK GUIDE
- 18. PRODUCT INFORMATION SHEET IN REFERENCE TO E.U. REGULATION 1369/2017
Programme Programme description
Machine Clean
Maintenance cycle with hot water to clean and freshen the
drum and to remove residue that may cause odour. For the
best result use this cycle once a month. Before running this cy-
cle, remove all items from the drum. In the washing phase
compartment of the detergent dispenser, put the flap of the
compartment in upward position. Pour a cup of chlorine bleach
or a washing machine cleaner in the washing phase compart-
ment. DO NOT use both together.
After the drum cleaning, run a further rinse cy-
cle with empty drum and no detergent to re-
move any residue of bleach.
1)
During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
2)
If you set a Steam programme with dried laundry, at the end of the cycle the laundry can be humid.
Line dry the items for about 10 minutes.
3)
Steam programme doesn't remove particularly intense odour.
Programme temperature, maximum spin speed and maximum load
Programme Default tempera-
ture
Temperature
range
Reference spin speed
Spin speed range
Maximum
load
Washing programmes
Cottons
40 °C
95 °C - Cold
1400 rpm
1400 rpm - 400 rpm
9 kg
Synthetics
40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Delicates
40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Wool/Silk
40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
2 kg
Steam programme
Steam
- - 1.5 kg
Washing programmes
OKOPower
30 °C
60 °C - 30 °C
1400 rpm
1400 rpm - 400 rpm
5 kg
Anti-Allergy
60 °C
1400 rpm
1400 rpm - 400 rpm
9 kg
www.aeg.com20