User manual

5. The three holes must then be plugged
with the plastic plug caps supplied in
the bag containing the instruction
booklet, which can be found inside the
drum.
Positioning
Install the machine on a flat hard floor. Make sure
that air circulation around the machine is not im-
peded by carpets, rugs etc. Check that the ma-
chine does not touch the wall or furniture. Level
the washing machine by raising or lowering the
two front feet. If necessary, check the setting with
a spirit level. Any necessary adjustment can be
made with a spanner. Accurate levelling prevents
vibration, noise and displacement of the machine
during operation.
CAUTION!
Never place cardboard, wood or similar materials
under the machine to compensate for any un-
evenness in the floor.
Water inlet
WARNING!
This appliance must be connected to a cold water supply.
Do not use the hose from your previous machine to connect to the water supply.
26 Installation