LB3681 USER MANUAL IT Istruzioni per l’uso Lavabiancheria
www.aeg.com INDICE 1. INFORMAZIONI DI SICUREZZA.................................................................................3 2. ISTRUZIONI DI SICUREZZA........................................................................................ 4 3. INSTALLAZIONE..........................................................................................................6 4. DESCRIZIONE DEL PRODOTTO............................................................................. 10 5. PANNELLO DEI COMANDI......
ITALIANO 1. 3 INFORMAZIONI DI SICUREZZA Leggere attentamente le istruzioni fornite prima di installare e utilizzare l'apparecchiatura. I produttori non sono responsabili di eventuali lesioni o danni derivanti da un'installazione o un uso scorretti. Conservare sempre le istruzioni in un luogo sicuro e accessibile per poterle consultare in futuro. 1.
www.aeg.com • • • • • • • • La pressione di funzionamento dell'acqua nel punto di ingresso dal collegamento esterno deve essere compresa fra 0.5 bar (0.05 MPa) e 8 bar (0.8 MPa). Le aperture di ventilazione alla base (ove previste) non devono essere coperte da un tappeto, da una moquette o da eventuali rivestimenti per pavimenti.
ITALIANO • Non installare l'apparecchiatura in condizioni in cui non è possibile aprire completamente la porta dell'apparecchiatura stessa. • Non collocare un contenitore sotto l'apparecchiatura per raccogliere possibili perdite. Contattare il Centro di Assistenza Autorizzato per sapere quali accessori si possono utilizzare. 2.2 Collegamento elettrico • L'apparecchiatura deve disporre di una messa a terra. • Utilizzare sempre una presa elettrica con contatto di protezione correttamente installata.
www.aeg.com 3. INSTALLAZIONE AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 3.1 Disimballo AVVERTENZA! Prima di installare l'apparecchiatura, rimuovere tutto il materiale di imballaggio e i bulloni per il trasporto. AVVERTENZA! Utilizzare i guanti. 4. Aprire l'oblò e rimuovere il polistirolo dalla guarnizione dell'oblò e tutti i pezzi dal cesto. 1. Togliere la pellicola esterna. Se necessario, servirsi di un taglierino. 2.
ITALIANO 7 1 2 8. Sollevare l’apparecchiatura in posizione verticale. 9. Staccare il cavo di alimentazione e il tubo di scarico dagli appositi supporti. Si può vedere dell'acqua fuoriuscire dal tubo di scarico. Questa condizione è imputabile alle prove con acqua eseguite sulle apparecchiature in fabbrica. 10. Togliere i tre dadi con la chiave fornita insieme al dispositivo. 11. Estrarre i distanziatori in plastica. 12. Mettere nei fori i cappucci in plastica contenuti nel sacchetto del manuale.
www.aeg.com 45 20 O O x4 L'apparecchiatura deve essere in piano ed appoggiata in modo stabile. Una corretta regolazione del livello dell'apparecchiatura ne impedisce la vibrazione, il rumore e il movimento durante il funzionamento. Assicurarsi che il tubo di carico non sia in posizione verticale. 3. Ove necessario, allentare il dado ad anello per sistemarlo nella posizione corretta. 4. Collegare il tubo di carico dell'acqua a un rubinetto dell'acqua fredda con filettatura 3/4". 3.
ITALIANO Il settore rosso nella finestra "A" mostra questo problema. A In tal caso, chiudere il rubinetto dell'acqua e contattare il Centro di Assistenza autorizzato per sostituire il tubo. 3.5 Scarico dell'acqua Il tubo di scarico dovrebbe trovarsi a un'altezza non inferiore a 60 cm e non superiore a 100 cm. Sarà possibile collegare il tubo di scarico in diversi modi: Verificare che il tubo di scarico non venga immerso in acqua. Ci potrebbe essere un ritorno di acqua sporca nell'apparecchiatura. 3.
www.aeg.com Accertarsi che il tubo di scarico formi una curva per evitare che particelle passino dal lavandino all'apparecchiatura. 6. Posizionare il tubo direttamente in una conduttura di scarico incassata nel muro del locale e serrare con un fermo. 5. Senza la guida del tubo di plastica: Sistemare il tubo di scarico nel sifone e serrarlo con un fermo. Fare riferimento all'immagine. È possibile prolungare il tubo di scarico fino a un massimo di 400 cm.
ITALIANO 11 4.2 Panoramica dell'apparecchiatura 1 2 9 8 3 10 4 5 11 12 6 7 1 2 3 4 5 6 7 Piano di lavoro Erogatore del detersivo Pannello comandi Maniglia dell'oblò Targhetta dei dati Filtro della pompa di scarico Per mettere in piano l'elettrodomestico 8 9 10 11 12 Tubo di scarico Collegamento tubo di ingresso Cavo dell'alimentazione Bulloni per il trasporto Supporto tubo 5. PANNELLO DEI COMANDI 5.
www.aeg.
ITALIANO La spia digitale può mostrare: • Durata del programma (ad esempio • Tempo di ritardo (ad esempio ). oppure ). • fine del Ciclo ( ). • Codice di avvertenza (ad esempio: ). Spia fase di lavaggio. Lampeggia durante il pre-lavaggio e durante la fase di lavaggio. Spia fase di risciacquo. Lampeggia durante la fase di risciacquo. Quando l'opzione Soft Plus è attivata compare l'indicatore . Indicatore di fase centrifuga e scarico. Lampeggia durante la fase di centrifuga e scarico.
www.aeg.com 6. MANOPOLE E TASTI 6.1 On/Off Premendo questo pulsante per alcuni secondi sarà possibile attivare o disattivare l'apparecchiatura. Quando l'apparecchiatura viene accesa o spenta, si sentono due suoni diversi. Quando la funzione Stand-by disattiva automaticamente l'apparecchiatura per ridurre il consumo energetico, in alcuni casi potrebbe essere necessario attivare nuovamente l'apparecchiatura. Per ulteriori dettagli rimandiamo al paragrafo Stand-by nel capitolo Utilizzo quotidiano. 6.
ITALIANO L'apparecchiatura esegue solo la fase di scarico del programma di lavaggio selezionato. Il display mostra l'indicatore (freddo), e l'indicatore (no centrifuga) e l'indicatore . • opzione Solo centrifuga (Salto delle fasi lavaggio e risciacquo) . L'apparecchiatura esegue solo la fase di centrifuga del programma di lavaggio selezionato. Il display mostra l'indicatore (freddo), l'indicatore di fase velocità della centrifuga.
www.aeg.com Questa opzione aggiunge alcuni risciacqui al programma di lavaggio selezionato. Usare questa opzione per le persone allergiche ai residui di detergenti e in zone dove l'acqua è dolce. Questa opzione aumenta leggermente la durata del programma. • Salto della fase di lavaggio - Solo risciacquo opzione L'apparecchiatura esegue solo la fase di risciacquo, centrifuga e scarico del programma selezionato. L'indicatore corrispondente sopra al touch si illumina. 6.
ITALIANO Programma Descrizione programma Cotoni Baumwolle Cotone bianco e colorato. Sporco normale e leggero. Programmi standard per i valori di consumo dell'etichetta energetica.Conformemente alla normativa 1061/2010, il pro- 17 gramma Baumwolle a 60 °C e il programma Baumwolle a 40 °C con l’opzione sono rispettivamente il "Programma cotone standard a 60 °C" e il "Programma cotone standard a 40 °C".
www.aeg.com Programma Descrizione programma Outdoor Outdoor Capi sportivi in tessuti sintetici. Questo programma è stato pensato per lavare in modo delicato indumenti sportivi ad esempio vestiti da palestra, ciclismo, jogging e articoli simili per un uso all'aria aperta. Il carico di bucato consigliato è 2.5 kg. Per ottenere risultati migliori, non usare ammorbidente e fare in modo che non vi siano residui di ammorbidente nel cassetto del detersivo. Tessuti impermeabili, impermeabili-traspiranti.
ITALIANO 19 Programma Descrizione programma Pulizia Maschinenreinigung Ciclo di manutenzione per pulire e rinfrescare il cesto e rimuovere i residui che potrebbero produrre odori. Per ottenere i migliori risultati, utilizzare questo ciclo una volta al mese. Prima di eseguire questo ciclo, togliere tutti gli indumenti dal cesto. Nel cassetto del detersivo per la fase di lavaggio, portare l'inserto dello scomparto in posizione verticale.
www.aeg.com Programma Temperatura predefinita Intervallo di temperatura Velocità massima di cen- Carico massitrifuga mo Gamma velocità centrifuga 60 °C 1600 giri/minuto 1600 giri/min - 400 giri/min 8 kg 30 °C 40 °C - 30 °C 1200 giri/minuto 1200 giri/min - 400 giri/min 3 kg 30 °C 40 °C - A freddo 1200 giri/minuto 1200 giri/min - 400 giri/min 40 °C 60 °C - A freddo 1200 giri/minuto 1200 giri/min - 400 giri/min 8 kg 60 °C 1200 giri/minuto 1200 giri/min - 400 giri/min - Anti-allergie 20 min.
■ ■ ■ Prelavaggio ■ ■ ■ ■ ■ Extra risciacquo ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Risparmio tempo 3) ■ ■ ■ Partenza ritardata ■ ■ ■ Vapore finale ■ ■ ■ ■ ■ Più morbido ■ ■ ■ ■ ■ Jeans ■ 21 Pulizia Outdoor 20 min.-3 kg Anti-allergie Delicati Macchie1) Vapore Sintetici Lana/Seta Cotoni Fasi del programma ITALIANO Opzioni Solo risciacquo 2) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) Questa opzione non è utilizzabile con temperature inferiori a 40 °C.
www.aeg.com 8. IMPOSTAZIONI 8.1 Sicurezza bambino Questa opzione consente di evitare che i bambini possano giocare con il pannello dei comandi. • Per attivare/disattivare questa opzione, toccare i tasti e contemporaneamente fino a che la spia non si accende/spegne sul display. Attivazione dell'opzione: • Dopo che viene sfiorato il tasto Avvio/ Pausa (Start/Pause): tutti i tasti e il selettore dei programmi sono disattivati (eccetto il tasto On/Off).
ITALIANO 5. Impostare e avviare un programma per il cotone alla massima temperatura senza carico all'interno del cesto. 23 In questo modo si rimuoveranno eventuali residui di lavorazione dal cesto e dalla vasca. 10. UTILIZZO QUOTIDIANO AVVERTENZA! Fare riferimento ai capitoli sulla sicurezza. 10.1 Attivazione dell'apparecchiatura 1. Inserire la spina nella presa. 2. Aprire il rubinetto dell’acqua. 3. Premere il tasto On/Off per alcuni secondi per attivare l'apparecchiatura.
www.aeg.com Dopo un ciclo di lavaggio, ove necessario, rimuovere gli eventuali residui di detersivo dal cassetto del detersivo. 10.4 Controllare la posizione dell'inserto 1. Estrarre il cassetto del detersivo fino all'arresto. 2. Abbassare la leva per estrarre il contenitore. 1 2 3. Per utilizzare il detersivo in polvere, ruotare l'inserto verso l'alto. 4. Per utilizzare il detersivo liquido, ruotare l'inserto verso il basso.
ITALIANO programma corrispondente si accende. La spia del tasto Avvio/Pausa (Start/ Pause) lampeggia. Il display mostra il carico massimo dichiarato per il programma, la temperatura predefinita, la velocità di centrifuga massima, le indicazioni sulla fase di lavaggio (ove disponibili) e una durata indicativa del programma. 2. Per modificare la temperatura e/o la velocità di centrifuga, premere i relativi tasti. 3. Qualora lo si desideri, impostare una o più opzioni toccando i relativi tasti.
www.aeg.com 2. Al termine del rilevamento del carico si spegne e i puntini l'indicatore del tempo smettono di lampeggiare. La durata del programma verrà regolata di conseguenza, e potrebbe aumentare o diminuire. Dopo altri 30 secondi, inizia il riempimento dell'acqua. Al termine del rilevamento del carico, in caso di sovraccarico del cesto, l'indicatore lampeggia sul display: In questo caso, per 30 secondi, sarà possibile mettere in pausa l'apparecchiatura e togliere gli indumenti in eccesso.
ITALIANO Qualora la fase ProSense sia già stata eseguita e il riempimento di acqua sia già partito, il nuovo programma inizia senza ripetere la fase ProSense. L'acqua e il detersivo non vengono scaricati per evitare sprechi. Il display mostra la durata massima del programma, aggiornandola 20 minuti dopo l'inizio del nuovo programma. 10.12 Apertura dell' oblò Se la temperatura e il livello dell'acqua nel cesto sono troppo elevati e/o il cesto ancora gira, non è possibile aprire l’oblò.
www.aeg.com La spia indicatore o si spegne, mentre l'indicatore lampeggia e poi si spegne. 3. Al termine del programma, una volta ,è spenta la spia di oblò bloccato possibile aprirlo. 4. Premere il tasto On/Off per alcuni secondi per disattivare l'apparecchiatura. In ogni caso l'apparecchiatura svuota l'acqua automaticamente dopo circa 18 ore. 10.
ITALIANO 11.2 Macchie ostinate 11.4 Consigli ecologici Per alcune macchie, acqua e detersivo non è sufficiente. • Impostare un programma senza la fase di prelavaggio per lavare la biancheria normalmente sporca. • Avviare un programma di lavaggio con il carico massimo di biancheria consentito. • Qualora le macchie vengano pretrattate, sarà possibile usare un prodotto per rimuovere le macchie quando viene impostato un programma a basse temperature.
www.aeg.com Esaminare a intervalli regolari il cesto al fine di controllare la presenza di calcare. I detersivi normalmente disponibili in commercio contengono già addolcitori, ma consigliamo di eseguire di tanto in tanto un ciclo col cesto vuoto e un prodotto disincrostante. Attenersi sempre alle istruzioni riportate sulle confezioni dei prodotti. 12.
ITALIANO 3. Verificare che tutti i residui di detersivo vengano rimossi dalla parte superiore e inferiore dell'incasso. Servirsi di una spazzola piccola per pulire l'incasso. 31 AVVERTENZA! • Non togliere il filtro durante il funzionamento dell'apparecchiatura. • Non pulire la pompa se l'acqua presente nell'apparecchiatura è calda. Attendere che l'acqua si raffreddi. Procedere come segue per effettuare la pulizia della pompa: 1. Aprire il coperchio della pompa. 4.
www.aeg.com 5. Quando la ciotola è piena d’acqua, rimettere nuovamente il condotto di scarico in posizione e svuotare il contenitore. 6. Ripetere i passaggi 4 e 5 fino a che l'acqua non smette di fuoriuscire. 10. Pulire il filtro sotto al rubinetto dell'acqua. 2 1 7. Chiudere il condotto di scarico e ruotare il filtro in senso antiorario per rimuoverlo. 2 1 8. Se necessario, togliere la lanugine e gli oggetti dall'incasso del filtro. 9. Assicurarsi che il girante della pompa possa ruotare.
ITALIANO 33 2 1 Quando si scarica l’acqua utilizzando la procedura di scarico di emergenza, è necessario attivare di nuovo il sistema di scarico: a. Versare 2 litri d’acqua nello scomparto del lavaggio principale del contenitore del detersivo. b. Avviare il programma per scaricare l’acqua. 3. Pulire il filtro valvola sul retro dell'apparecchiatura con una spazzola. 12.
www.aeg.com necessario attivare di nuovo il sistema di scarico: 1. Versare 2 litri d’acqua nello scomparto del lavaggio principale del cassetto del detersivo. 2. Avviare il programma per scaricare l’acqua. 12.10 Precauzioni antigelo 2. Chiudere il rubinetto dell'acqua. 3. Sistemare le due estremità del tubo di carico in un contenitore e lasciare che l'acqua fluisca fuori dal tubo. 4. Svuotare la pompa di scarico. Fare riferimento alla procedura per lo scarico di emergenza. 5.
ITALIANO e chiudere il rubinetto dell'acqua. Contattare il Centro di Assistenza autorizzato. 35 AVVERTENZA! Scollegare la spina dalla presa di corrente prima di eseguire qualsiasi controllo. 13.2 Possibili guasti Problema Possibile soluzione Il programma non si avvia. Verificare che la spina sia collegata alla presa elettrica. Controllare che l’oblò dell’apparecchiatura sia chiuso. Assicurarsi che il fusibile all'interno del quadro elettrico non sia danneggiato.
www.aeg.com Problema Possibile soluzione Impostare il programma di scarico se si seleziona un programma senza fase di scarico. Impostare il programma di scarico se si sceglie un'opzione che termina con l'acqua in vasca. La fase di centrifuga non Impostare il programma di centrifuga. si avvia o il ciclo di lavaggio dura più a lungo del normale. Controllare che il filtro di scarico non sia ostruito. Pulire il filtro, se necessario. Fare riferimento al capitolo "Pulizia e cura".
ITALIANO 37 Problema Possibile soluzione La durata del programma aumenta o diminuisce durante l'esecuzione del programma. La funzione ProSense consente di regolare la durata del programma a seconda del tipo e del quantitativo di bucato. Consultare la “Funzione di rilevamento del carico ProSense" nel capitolo "Utilizzo quotidiano". I risultati del lavaggio non sono soddisfacenti. Aumentare la dose di detersivo o utilizzare un altro prodotto.
www.aeg.com 4. Tenere premuto il dispositivo di sblocco d'emergenza e, contemporaneamente, aprire l'oblò. 5. Estrarre la biancheria, quindi richiudere l'oblò. 6. Chiudere lo sportellino del filtro. 14. VALORI DI CONSUMO I dati di questa tabella sono indicativi. Diverse variabili possono influenzare i dati: la quantità e il tipo di biancheria, la temperatura dell'acqua e dell'ambiente. Durante il programma di lavaggio, la tecnologia Prosense può variare la durata di lavaggio e i valori di consumo.
ITALIANO Modalità Spento (W) Modalità Acceso (W) 0.30 0.30 39 Le informazioni riportate nel grafico qui sopra sono in conformità con la direttiva della Commissione Europea 1015/2010 che implementa la direttiva 2009/125/CE 15. DATI TECNICI Dimensione Larghezza/Altezza/ Profondità/Profondità totale 600 mm/ 850 mm/ 630 mm/ 660 mm Collegamento elettrico Tensione Potenza totale Fusibile Frequenza 230 V 2.
www.aeg.com 16.3 Kit di installazione in colonna AVVERTENZA! Non sistemare l'asciugabiancheria sotto alla lavabiancheria. 16.4 Piedistallo con cassetto L'asciugatrice può essere installata in colonna al di sopra della lavabiancheria soltanto utilizzando l'appropriato kit di installazione in colonna prodotto ed approvato da AEG. Verificare il kit di impilatura compatibile controllando la profondità delle proprie apparecchiature.
ITALIANO 41 Servizio dopo vendita Morgenstrasse 131 3018 Bern Zürcherstrasse 204E 9000 St. Gallen Seetalstrasse 11 6020 Emmenbrücke St. Jakob-Turm Birsstrasse 320B 4052 Basel Comercialstrasse 19 7000 Chur Vendita pezzi di ricambio Industriestrasse 10, 5506 Mägenwil,Tel. 0848 848 111 Consulenza specialistica/Vendita Badenerstrasse 587, 8048 Zürich, Tel. 044 405 81 11 Garanzia Per ogni prodotto concediamo una garanzia di 2 anni a partire dalla data di consegna o dalla sua messa in funzione.
www.aeg.
ITALIANO 43
157006151-A-462016 www.aeg.