User manual

Operating Instructions
21
Set the Delay Timer/Soaking Duration
Delay Timer
The button DELAY TIMER (INÍCIO DIFERIDO) allows the start of a wash-
ing program to be advanced by 1 to a maximum of 19 hours.
0 To do this, press the button DELAY TIMER
(INÍCIO DIFERIDO) as often as necessary un-
til the required start delay is shown in the
multidisplay, e.g.12h in the form for a pro-
gram start delay of 12 hours.
If19h is shown and you press again, 0h and
afterwards the run time of the set washing program appears (display in
minutes, e.g.126). In this state, the delay timer is not set.
3
Once the delay timer has been set, it will only be activated after press-
ing the START/PAUSE (INÍCIO/PAUSA) button.
Soaking Duration
With the SOAKING (SABONÁRIA) button pressed, you can extend the
soaking duration with the button DELAY TIMER (INÍCIO DIFERIDO)
(maximum 10 hours and approx. 20 min.).
3
Without delay timer, the soaking duration is approx. 30 minutes, plus a
pre-wash time of approx. 20 minutes.
0 To set, press the button DELAY TIMER (INÍCIO DIFERIDO) as often as
necessary until the required soaking duration is shown in the multidis-
play, e.g.1h (= 1 hour).
After approx. 2 seconds, the multidisplay
shows the run time in minutes.
This run time is comprised as follows:
3
While SOAKING (SABONÁRIA) is running, PRE WASH (PRÉ-LAVAGEM)
lights up on the program sequence display.
selected soaking period e.g. – 1h =60 minutes
+ heating up/prewash period e.g. approx. 20 minutes
+ run time of the selected washing program e.g. approx. 126 minutes
=
displayed value e.g. approx. 206 minutes