User manual

Instructions for use

Completion of the Washing Program

Program sequence display

Before the start, the program steps to be carried out

are indicated by the Program sequence display. The

current program step is displayed during the washing

program.

Multidisplay

The expected remaining run time (in minutes)

is displayed in the multidisplay until the end

of the program.

With automatic program adaptation by the controller of the washing

machine, (quantity of washing, type of washing, imbalance recognition,

special rinse etc.) it is possible to stop or correct the counting of the re-

maining run time.

Changing a Washing Program

Changing or aborting a program

0 1. Press button START/PAUSE.

2. Turn programme knob to OFF (AUS, ARRET). The washing program is

aborted.

3. If required, set a new washing program. Otherwise turn the programme

knob to PUMP OUT (PUMPEN, VIDANGE) and then press the button

START/PAUSE.

The washing program can be interrupted at any time with the button

START/PAUSE and continued by pressing the button again. Changing

the washing program is possible only after the programme knob was

turned to OFF (AUS, ARRET).

Select the Additional Program

The additional programs QUICK WASH (KURZ, COURT) or STAIN

(FLECKEN, TACHES) can also be selected after the program start.

0 1. Press the button START/PAUSE.

2. Press the button QUICK WASH (KURZ, COURT) or the button STAIN

(FLECKEN, TACHES).

3. Press the button START/PAUSE again. The washing program is contin-

ued.