Owner manual

Adding detergent/additives

Important: Use only detergents and additives that are suitable for use

in domestic washing machines.

1 For USA and Canada only!

Important! Only LOW-SUDSING detergent suitable for a front-loading

washing machine can be used in this machine. This machine can heat

the water up to 95 degrees celsius, or 200 degrees fahrenheit, and care

should be taken to ensure that the correct washing powder is used. If

you have any doubt, check with your dealer or the distributor.

WARRANTY AND CONSEQUENTIAL DAMAGES ARE VOIDED IF A LOW

SUDSING DETERGENT IS NOT USED.

Dose detergent and additives according to the instructions of the de-

tergent and additive manufacturers. Follow the instructions on the

packaging.

Dosing depends upon:

– the washing’s degree of soiling,

– the size of the load

– the degree of hardness of the water supply.

• If the manufacturer does not give instructions for small loads: for a

half load, use a third less, for a very small load, use only half of the

detergent that is recommended for a full load.

• From water hardness 2 (= medium) upwards, water softener should

be used. Detergent can then always be dosed for water hardness 1

(= soft). Your local water company will be able to give you informa-

tion about the water hardness in your area.

1. Pull the detergent dispenser drawer out as far as the stop.

2. Add the detergent/additives.

3. Push the drawer in fully.

In-wash stain treatment/

tablets

Washing powder/tablets

for the main wash

Softeners/

wash-care products

to preserve the shape

of garments/

starch

Washing powder/tablets

for the pre-wash

or for water softener