Operation Manual

Installation and connection instructions

Installation Safety Precautions

• When moving do not tilt the washing machine onto its front or onto

its right hand side (viewed from the front). This is to prevent the pos-

sibility of the electronic components becoming wet.

• Before installation inspect the machine for transport damage. Do not

connect the appliance if it is damaged - contact your retailer.

• Ensure all packaging and transit bolts/bars have been removed, see

„Removal of Transit Packaging“. Failure to remove transit bolts/bars

may cause serious damage to the appliance or property.

• Always insert the plug into a correctly installed earthed socket.

• Any plumbing work required to install this appliance should be

carried out by a plumber or competent person.

• Check that the electricity supply is the same as that indicated on the

appliance´s rating plate.

• Any electrical work required to install this appliance should be carried

out by an electrician or competent person.