Washer User Manual

Programme sequence

• The programme progress display shows the programme step that is

currently being carried out.

• The multi-display shows the estimated time remaining (in minutes)

until the end of the programme.

3 The time remaining can increase or stay the same for a while during the

course of the cycle as the programme adjusts itself to various condi-

tions (e.g. type of washing and quantity, out of balance spin detection,

special rinse cycle, etc.).

Interrupting a programme/adding washing

Interrupting a programme

• A programme can at any time be interrupted by pressing the START/

PAUSE button and resumed by pressing START/PAUSE again.

• To cancel a programme before it has ended, turn the programme se-

lector to OFF. Important: Be careful of water in the appliance.

Adding washing

Washing can be added, as long as the DOOR indicator is illuminated

green.

1. Press the START/PAUSE button. The door can be opened.

2. Close the door and press the START/PAUSE button again. The pro-

gramme will continue.

End of the wash cycle/removing the washing

At the end of the programme, END lights up on the programme

progress display. The door can be opened as soon as the DOOR indicator

is lit green.

1. Open the loading door and remove the washing.

2. Turn the programme knob to OFF.

3. Close the water valve.

4. After washing, pull out the detergent drawer a little to enable it to dry

out. Keep the loading door very slightly open so that the washing ma-

chine can air.