User manual

50
5. Replace the pump cover. Laterally
insert the webs on the cover into
the guide slots and screw on the
cover in a clockwise direction.
6. Close the emergency emptying
hose and place it in the holder.
7. Close the flap.
Anti-flood Aqua Con-
trol + Aqua Alarm
The inlet hose has a mechanical built in safety device. In the event of
the filling hose failing, the safety device will automatically shut off the
water supply.
In the event of a leak within the machine the float switch, which is
mounted in the base of the appliance, will operate the drain pump and
an audible signal will be heard
The system will operate as long as the appliance is connected to the
mains electricity supply, even if the programme selector is in the off
position.
What does "UPDATE" mean?
The control system of your washing machine is fully electronic. The
software which determines this control system can be reprogrammed.
If a further improvement to washing technology is introduced by AEG,
then your machine can be updated. The cost of the UPDATE will be ad-
vised at the time of the request.
For further information regarding this, please contact the AEG Custom-
er Care Department.