User manual

Instructions for use
42
Water Cooling
It may be necessary to cool down the water before pumping it out in
order to prevent thermal damage to the plastic drainage pipes.
3
The water is cooled down before pumping out at the end of the main
wash cycle (by adding cold water). This setting only works on the
COTTONS/LINEN, EASY-CARES (KOCH/BUNT, PFLEGELEICHT) programme
when the temperature is above 40 °C.
When the appliance is supplied water cooling is not set except for the
SENSITIVE (SENSITIV) programme option.
Setting the water cooling function:
0 1. Turn the programme selector to SHORT SPIN (SCHONSCHLEUDERN).
2. Press the PRE WASH (VORWÄSCHE) button for at least 5 seconds. After
the button has been kept pressed for 5 seconds, MAIN WASH
(HAUPTWÄSCHE) flashes on the programme progress display for
5 seconds.
3. Release the PRE WASH (VORWÄSCHE) button while MAIN WASH
(HAUPTWÄSCHE) is flashing. Once it has stopped flashing, the water
cooling function is set. It remains set until it is cancelled again.
4. If you wish to check whether the water cooling function is set:
– Turn the programme selector to SHORT SPIN (SCHONSCHLEUDERN).
– Press the PRE WASH (VORWÄSCHE) button briefly.
When MAIN WASH (HAUPTWÄSCHE) flashes in the programme progress
display, the water cooling function is set.
Cancelling the water cooling function:
0 1. Turn the programme selector to SHORT SPIN (SCHONSCHLEUDERN).
2. Press the PRE WASH (VORWÄSCHE) button for at least 5 seconds. MAIN
WASH (HAUPTWÄSCHE) flashes in the programme progress display as
soon as the button is pressed. After 5 seconds MAIN WASH
(HAUPTWÄSCHE) will stop flashing and remain constantly illuminated
for 5 seconds.
3. While MAIN WASH (HAUPTWÄSCHE) is constantly illuminated, release
the PREWASH (VORWÄSCHE) button. Once MAIN WASH
(HAUPTWÄSCHE) is no longer illuminated, the water cooling function
has been cancelled.
3
Water cooling increases water consumption and the programme dura-
tion.