User manual

Installation and connection instructions

Installation of the appliance

Transporting the appliance

• Do not place the washing machine on its front or on its right hand

side (viewed from the front). This is to prevent the possibility of the

electronic components becoming wet.

• Never transport the unit without the transport packaging and bolts/

bars. Do not remove the transport packaging until the appliance is at

the installation location. Transporting the unit without the transport

packaging can damage it.

• Never lift the appliance by the door.

When transporting the unit with a sack trolley:

• Attach the sack trolley only at the side. The shovel of the sack trolley

must not be longer than 24 cm, otherwise the float switch can be de-

stroyed.

Remove transport packaging

Important! It is essential to re-

move the transport packaging be-

fore putting the appliance into

operation. Keep all parts of the

transport packaging in a safe

place for future use.

0 1. Open both hose holders on the

appliance's rear side and remove

the hoses and mains cable.

2. Pull both hose holders off the ap-

pliance with a strong pull.