User manual

Setting up and connection instructions
48
Water Inflow
A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a VDE-approved, complete set
of hoses with fitted hose screw connections offered by our Customer
Service is permissible.
– Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for
washing machines without Aqua-Control.
– Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for
washing machines with Aqua-Control.
Attention! Never cut into pieces in order to extend the hoses!
3
Sealing rings are supplied either in the plastic nuts of the hose screw
connection or in the enclosed pack. Do not use other seals!
0 1. Connect the hose with the angled connection
to the machine.
Attention! Only tighten the screw connection
manually.
2. Connect the hose with the straight connection
to a water tap with a screw thread of R 3/4 (inches).
Attention! Only tighten the screw connection manu-
ally.
3. By slowly opening the water tap before putting the
washing machine into operation, check whether the
connection is free of leaks.