User manual

Instructions for use

If the EASY IRON (STRIJKVRIJ, SANS REPASSAGE) programme was

selected:

With EASY CARE (STRIJKVRIJ, SANS REPASSAGE), a crease prevention

cycle of approx. 30 minutes takes place after the programme is com-

plete. The multi-display shows the time remaining (e.g. 1 minute) and

the END (EINDE, FIN) indicator iluminates.

You can remove the washing at any time during the crease prevention

cycle.

0 1. To do this, press the START/PAUSE (START/PAUZE, MARCHE/PAUSE)

button.

The door can now be opened and the washing removed.

2. Finally, turn the programme selector to OFF (UIT, ARRET).

The wash programme is complete.

If the display OVER DOSING (OVERDOS., SURDOSAGE)

lights up, too much washing detergent was used in the

washing program just ended. During the next wash, pay

attention to the dosing information of the washing detergent

manufacturer and pay attention to the filling quantity!

Attention! If the washing machine is not used for a long time:

Close the water tap and disconnect the washing machine from the

electricity mains. (The Aqua Control water protection does not function

if the power supply is interrupted).

OVERDOS.

SURDOSAGE