User manual

Instructions for use
21
Soaking Duration
With the SOAKING (INWEKEN, TREMPAGE) button pressed, you can
extend the soaking duration with the button DELAY TIMER (STARTTIJD-
KEUZE, DEPART DIFFERE) (maximum 10 hours and approx. 20 min.).
3
Without delay timer, the soaking duration is approx. 30 minutes, plus a
pre-wash time of approx. 20 minutes.
0 To set, press the button DELAY TIMER (STARTTIJDKEUZE, DEPART
DIFFERE) as often as necessary until the required soaking duration is
shown in the multidisplay, e.g.1h (= 1 hour).
After approx. 2 seconds, the multidisplay
shows the run time in minutes.
This run time is comprised as follows:
3
While SOAKING (INWEKEN, TREMPAGE) is running, PRE WASH (VOOR-
WAS, PRELAV.) lights up on the program sequence display.
selected soaking period e.g. 1h =60 minutes
+ heating up/prewash period e.g. approx. 20 minutes
+ run time of the selected washing program e.g. approx. 129 minutes
=
displayed value e.g. approx. 209 minutes