User manual

Instructions for use

Start the Washing Program

0 1. Check that the water valve is open.

2. Start the washing program: Press the button

START/PAUSE (START/PAUZE, MARCHE/PAUSE).

The washing program is started.

The filling door is not correctly closed if, when the button START/PAUSE

(START/PAUSE, MARCHE/PAUSE) is pressed,

– the indicator DOOR (DEUR, PORTE) flashes red

– the fault code E40 in the multidisplay flashes

– and the indicator MAIN WASH (HOOFDWAS, LAVAGE) flashes.

In this case, press the filling door firmly closed and again press the but-

ton START/PAUSE (START/PAUZE, MARCHE/PAUSE).

Completion of the Washing Program

Program Sequence Display

Before the start, the program steps to be carried out are

displayed by the program sequence display. Ther current

program step is displayed during the washing program.

Multi-Display

The expected remaining time (in minutes) is

shown up to the program end in the multi-dis-

play.

With automatic program adaptation by the controller of the washing

machine (quantity of washing, type of washing, imbalance recognition,

special rinse etc.), it is possible to stop or correct the counting of the

remaining run time.