User manual

Operating Instructions

Changing the spin speed/Selecting the

rinse hold function

If required, change the spin speed for the final

spin/select rinse hold:

Changing the spin speed

0 Continue pressing the spin speed/o (RINSE

HOLD) button until the indicator for the desired

spin speed is illuminated.

If you do not change the spin speed, the final spin

will be adjusted automatically depending on the

type of wash cycle:

The speed for the intermediate spin cycle is dependent on the wash cy-

cle selected and cannot be altered.

Selecting the rinse hold function

0 Continue pressing the spin speed/o (RINSE HOLD) button until the

indicator o (RINSE HOLD) for the desired spin speed is illuminated.

If o (RINSE HOLD) is selected, the washing will remain in the final

rinse water and will not be spun.

The washing will not be spun throughout the entire wash cycle.

As a result the cycle is a very quiet one. o (RINSE HOLD) is therefore

especially suitable for washing at night.

Note: The laundry remains lying in the water until you drain or spin

(see section “Ending a wash cycle”). After 18 hours however, it is auto-

matically drained and pumped.

– t (COTTONS/LINEN) 1000 revolutions per minute

– } (EASY CARES)/<(EASY IRON) 900 revolutions per minute

– Ã (DELICATES) 700 revolutions per minute

– s (WOOLLENS)/P (Hand Wash) 900 revolutions per minute