User manual

Running a wash cycle

Opening the door/loading washing

1. Open the door: pull the handle on the door.

When the appliance is switched on, the DOOR and START/PAUSE indica-

tors show whether the door can be opened:

2. Separate washing and load it loose-

ly. Mix large and small items.

Important: Do not get any washing

caught between the door and the

rubber seal.

3. Firmly push the door shut. Door

catch must audibly click shut.

Adding detergent /conditioner

Important: Only use detergents/conditioners that are suitable for use

in household washing machines.

Add detergent/conditioner in accordance with the detergent/condi-

tioner manufacturer’s instructions. Observe instructions on the packag-

ing.

The amount of detergent used depends on:

– the degree of soiling,

– the load size

– the hardness of the tap water.

• If the manufacturer does not make any recommendations with re-

gard to small volumes of washing: For a half-load use a third less, and

for a very small load use only the half the amount of detergent that

is recommended for a full load.

DOOR indicator START/PAUSE indicator Can the door be opened?

illuminated green

flashing red or not illumi-

nated

yes

illuminated green illuminated red

yes, after pressing the

START/PAUSE button

illuminated red

or not illuminated

flashing red

or illuminated red

no, water level and/or

temperature too high