User manual

Operating Instructions
14
Consumption Data and Wash Times
The values given in the following table for selected programmes were
calculated under standardized conditions. They provide a useful guide
for operation in the home.
Before the First Wash
0 1. Pull the washing powder drawer out slightly.
2. Pour about 1 litre of water through the detergent disperser drawer into
the washing machine. The next time a programme is started the solu-
tion container will be closed and the ECO valve can function correctly.
3. Run one wash cycle without washing:
– MAIN WASH Programme;
– Temperature 95 °C;
– use half the quantity of detergent recommended by the manufac-
turer for a full load.
This removes any residues from the drum and solution container which
may have been left during manufacturing.
Programme Selector
Tempera-
ture Selector
Load in kg
Water
in Litres
Energy
in kWh
Time in
Minutes
COTTONS/LINEN
MAIN WASH
95 5 57 1.90 140
COTTONS/LINEN
MAIN WASH
60
1
1) Note: The selected programme is tested in accordance with EN 60 456. The con-
sumption values, however, can deviate depending on the following: water pres-
sure, water hardness, water inlet temperature, room temperature, washing type
and quantity, the detergent used, fluctuations in the mains voltage and the se-
lected programme options.
5 54 0.95 128
COTTONS/LINEN
MAIN WASH
40 5 54 0.60 115
EASY-CARES 40 2.5 45 0.40 65
DELICATES 30 2.5 40 0.25 40
WOOL 30 2 43 0.25 50