User manual

Setting up and connection instructions

Setting Up the Unit

Washing machines with curved panels are not suitable for substruc-

tures.

Transporting the Unit

• Do not place the washing machine on its front side or on its right side

(looking from the front). Otherwise the electrical components can get

wet.

• Never transport the unit without using the transport safeguard. Do

not remove the transport safeguard until you reach the installation

site. Transporting the unit without the transport safeguard can result

in damage to the unit.

• Never lift the unit by the open filling door or by its base.

• When transporting the unit with a sack trolley: Attach the sack trol-

ley only at the side.

Remove the Transport Safeguard

Attention! It is essential to re-

move the transport safeguard be-

fore putting the unit into

operation! Keep all parts of the

transport safeguard in a safe

place for possible later transport

(moving house).

0 1. Open both hose holders on the

rear of the unit and remove the

hoses and the mains cable.

2. Firmly pull both hose holders off

the unit.