User manual

Instructions for use

Performing a Wash Cycle

Brief guide

A wash cycle consists of the following steps:

1. Open the door and load the washing.

2. Close the door.

3. Add detergent/additives.

4. Set the appropriate wash programme:

– Set the programme and temperature using the programme knob

– Set additional programme functions as required.

5. Change the Spin Speed/press RINSE HOLD (ARRET CUVE PLEINE, SPOEL-

STOP) as necessary.

6. Start the wash programme by pressing the START/PAUSE (MARCHE/

PAUSE, START/PAUZE) button.

After the wash programme is complete:

Important! If the wash cycle was stopped with Rinse Hold, select

DRAIN (VIDANGE/POMPEN) or SPIN (ESSORAGE/CENTRIFUG.) before

opening the door.

7. Open the door and take out the washing.

The door can be opened after the DOOR (PORTE/DEUR) light goes off

and the END (FIN/ENDE) light has come on.

8. Switch off the washing machine: Turn the programme knob to OFF

(ARRET/UIT).