User manual

Installing your washing machine

Removing transport packing

Warning!

All parts used to protect internal components of the washing machine during

transport must be removed before you use the washing machine for the first

time. Keep these parts and their attachments in case you need to transport it

again.

1. Remove the outer packaging from the washing ma-

chine. Tilt it backwards, rotate it by a quarter of a turn on

one of its back corners to take it off the transport base. It

will naturally be separated from the washing machine.

2. Open your washing machine cover and take out the

packing that holds the drum in place and the red plastic

wedge. Close the cover again.

3. Use a spanner to unscrew and remove the two spacers (A)

at the back of the washing machine.

4. Now put the closers (B) provided in the pack attached to

the washing machine into position to close the openings

that became visible, and do not forget to fold back the plug

into the middle.

Installation and connection instructions

CQ005