User manual

User’s instructions
32
10.3.4. Leveling
Precise leveling will prevent vibrations, noise and movements of the
washing machine during operation.
Make the washing machine level by adjusting
the leveling screw that is too short.
Unscrew the stand and locking collar assembly
(lift the washing machine if necessary).
When the washing machine is stable, maintain
the stand on the ground and turn the locking
collar as far as posible.
10.3.5. Water inlet
Screw the supply pipe connector onto the water
inlet tap (20x27 mm), remembering to use the
washer provided with the washing machine.
Open the water inlet tap.