User manual

UIser’s instructions

"Programme tables"). The control lamps corresponding to the pro-

gramme light on.

The OFF position of the programme selector switchs off the appliance

(it is switched on for all other positions). This function enables also to

cancel a programme and to restart the washing machine in case of er-

ror.

If the programme selector is turned when the appliance is performing

wash cycle, the programme will be carried out and will ignore the new

position of the selector. In order to solve this problem, re-position the

programme selector on its original position.

6.4. Selecting the spinning speed

When selecting the programme or in Pause mode, the light correspon-

ding to the maximum spinning speed illuminates. You can adjust the

spinning speed which corresponds to the type of laundry and the de-

gree of dampness required at the end of the wash depending on your

drying possibilities. You can also choose the RINSE HOLD option.

If you do not modify the spinning speed, the final spinning is automa-

tically adapted to the chosen programme. The middle spinning speed

depends on the chosen programme and can not be modified.

6.5. Selecting the pushbuttons

Selecting if necessary one or several additionnal programme pushbut-

tons

• to change the selection, press an another pushbutton.

• to cancel a wrong selection, press again the same pushbutton.

6.6. End of programme

The appliance is equipped with a security which prevents the opening

of the lid during the cycle. When the DOOR light illumintates, you can

open the lid.