User manual

22
Set the washing program
3
For a suitable program, correct temperature and possible additional
program for the different types of washing, see the "Program Tables" in
the following chapter.
0 Set washing program and
temperature: set the program
selector to the desired washing
program with the desired
temperature. The selected program/
the selected program group is
illuminated.
The duration of the program set is
displayed in the Multidisplay in
minutes.
0 If necessary select additional program(s):
The additional program selected is illuminated.
• To change the selection press another button.
• To delete the selection press the button again.
0 If necessary select the spin speed for the final
spin: press the SPIN button as many times as
required until the desired spin speed appears in
the display.
When the displays shows "0" the washing is left in the last rinse water,
it is not spun (rinse hold).
0 If necessary set the time delay: press the
TIME DELAY button as many times as
required until the desired delay is displayed,
this is shown in the form 12h for a 12 hour
delay to the start of the program.
3
If 19h is displayed and you press again, the duration of the washing
program set appears (display without h !). In this condition no time
delay is set.
In the case of SOAKING, the time delay defines the soaking period.
(Without time delay the soaking time is approx. 1 hour.)