User manual

Levels Water hardness range
C01 ≤5 ≤3 ≤ 4 ≤0.5
C02 6 - 13 4 - 7 5 - 9 0.6 - 1.3
C03 14 - 21 8 - 11 10 -15 1.4 - 2.1
C04
1)
22 - 29 12 - 16 16 - 20 2.2 - 2.9
C05 30 - 37 17 - 20 21 - 26 3.0 - 3.7
C06 38 - 45 21 -25 27 - 32 3.8 - 4.5
C07 ≥46 ≥26 ≥33 ≥4.6
1)
Factory setting, able to satisfy most of the use conditions.
5.3 Pouring salt
The water softener function acts through
special resins present in the appliance.
To regenerate the resins and make them
ready to soften the water pour a special
salt in the compartment
Salt
:
1. Open the detergent dispenser.
M
ax
▼
M
a
x
▼
Ma
x
▼
Salt
2. Open the compartment
Salt
.
Max
▼
M
a
x
▼
Max
▼
3. Pour the special salt.
Max
▼
Max
▼
Max
▼
SALT
4. Close the salt compartment and the
detergent dispenser.
Regularly check if there is
enough salt.
The compartment
Salt
can contain about
600 gr of salt that are sufficient for about
20 - 300 washing cycles (or 4 - 70 weeks)
depending on the set water hardness
level and if the water softener is
activated during wash phase only. If the
water softener is activated also during
rinse phase, the salt refilling lasts 5 - 80
washing cycles (or 1 - 18 weeks)
depending on the set water hardness
level. Refer to 'How to set the water
hardness level'.
The display shows the indicator when
compartment
Salt
needs to be refilled
with salt, even if a little salt still remains.
ENGLISH
13