User manual

Protocol IEEE 802.11b/g/n
two stream radio
Max Power <20dBm
The software included in this product con-
tains copyrighted software that is licensed
under the BSD, GPL-2.0 , LGPL-2.0,
LGPL-2.1, zLib, MIT, ISC, Apache 2.0 and
others.
It is possible to display the complete copy
of the licenses in the AEG App that can
be downloaded from the corresponding
store App under the License menu sec-
tion.
It is possible to download the source code
of the open source software used in the
product by looking for Wi-Fi Module Soft-
ware version into the portal: http://
aeg.opensoftwarerepository.com, inside
NIUX subfolder.
9.1 Installing and configuring
"My AEG"
When connecting the washing machine
to the application, stand near it with your
smart device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device.
2. Download and install the App "My
AEG".
3. Make sure you started a Wi-fi
connection in the washing machine.
If not, read the next paragraph
'Configuring the washing machine
wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in "My
AEG".
5. Follow the instructions on the App
for the washing machine registration
and configuration.
A message appears on the washing
machine display to confirm that the
configuration was successful.
9.2 Configuring the washing
machine wireless connection
1. In the programme list screen, tap on
the shortcut
to enter the setting
menu.
2. Tap on the Wi-Fi bar to switch the
connection on .
A pop-up message will appear, the icon
starts flashing and wireless module
begins starting up. It may take about 2
minutes before it is ready.
Cancel
Starting up
This might take up to 2 minutes.
Have your App ready
Wi-Fi
When the wireless module is ready, a
pop-up message will appear to inform
you, that the access point will be open
for about 3 minutes.
Cancel
Trying to connect to App
Access point will be open for 3
minutes.
Wi-Fi
3. Configure the "My AEG" app on
your smart device.
4. If the connectivity is configured, a
message appears on the washing
machine display to confirm that the
configuration was successful.
OK
Wi-Fi
Connected!
Signal strenght is good, 4/5
5. Tap on OK to get back to the
machine settings list.
6. Tap on Programmes to get back to
the programme list screen.
www.aeg.com
20