User manual

Programme Programme description
Machine Clean Maintenance cycle with hot water to clean and freshen the
drum and to remove residue that may cause odour. For the
best result use this cycle once a month. Before running this cy-
cle, remove all items from the drum. Pour a cup of chlorine
bleach or a washing machine cleaner in the washing phase
compartment. DO NOT use both together.
After the drum cleaning, run a further rinse cy-
cle with empty drum and no detergent to re-
move any residue of bleach.
Run this programme especially when the mes-
sage Cleaning cycle recommended pops up.
If the cleaning programme is postponed, the
message keeps on popping up during next
uses until it is run.
1)
During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
2)
If you set a Steam programme with dried laundry, at the end of the cycle the laundry can be humid.
Line dry the items for about 10 minutes.
3)
Steam programme doesn't remove particularly intense odour.
Programme temperature, maximum spin speed and maximum load
Programme Default temperature
Temperature range
Reference spin
speed
Spin speed range
Maximum load
OKOPower 30 °C
60 °C - 30 °C
1600 rpm
1600 rpm - 400 rpm
5 kg
ColourPro 30 °C
30 °C - Cold
1200 rpm
1200 rpm - 400 rpm
9 kg
Cottons 40 °C
95 °C - Cold
1600 rpm
1600 rpm - 400 rpm
9 kg
Cottons Eco 40 °C
60 °C - 40 °C
1600 rpm
1600 rpm - 400 rpm
9 kg
Synthetics 40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Delicates 40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Wool/Silk 40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
2 kg
Steam - - 1.5 kg
20min 3kg 30 °C
40 °C - 30 °C
1200 rpm
1200 rpm - 400 rpm
3 kg
www.aeg.com26