User manual

10.9 Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
.
During the washing cycle, the appliance
mixes the detergent, the stain removal
for fabric treatment and/or the fabric
softener with water before introducing
them into the drum; the indicator
MIX
appears and disappears on the display
according to the different programme
phases (the arrows flash alternatively).
If you select the 易熨烫 the steam phase
indicators come on.
The steam phase is running:
.
The anti-crease phase is running:
.
10.10 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the button 启动/暂停.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button 启动/暂停 again.
The washing programme continues.
10.11 Cancelling a running
programme
1. Press the button 开/关 to cancel the
programme and to deactivate the
appliance.
2. Press the button 开/关 again to
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase. The
water and the detergent are
not drained out in order to
avoid waste. The display
shows the maximum
duration of the programme,
updating it about 20 minutes
after the starting of the new
programme.
10.12 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
1. Touch the button 启动/暂停.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the button
启动/暂停.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete, or set Spin
Drain programme and than press 启
动/暂停 button.
ENGLISH
25