User manual
BEFORE FIRST USE
1.
To activate the drain system, put 2 li-
tre of water in the main wash com-
partment of the detergent dispenser.
2.
Put a small quantity of detergent in
the main wash compartment of the
detergent dispenser. Set and start a
programme for cotton at the highest
temperature without laundry. This re-
moves all possible dirt from the drum
and the tub.
USING THE APPLIANCE
1.
Open the water tap.
2.
Connect the mains plug to the mains
socket.
ACTIVATING THE APPLIANCE
AND SETTING A
PROGRAMME
For a correct operation of the weight sensor, activate the appliance and
set the programme BEFORE you put the laundry in the drum.
1.
Press button
1
to activate the appli-
ance.
2.
Turn programme knob
2
to the nec-
essary programme. The programme
indicator comes on.
3.
The indicator of button
4
flashes
with red colour.
4.
The display shows the default tem-
perature and spin and the empty indi-
cator bars of the available functions.
5.
If it is necessary, press button
10
and
button
9
to change the water tem-
perature and the spin speed.
6.
If necessary, press the related buttons
to add some functions or to set a de-
layed start. The display shows the
symbol of the set function and the
digit (I) shows the delayed time.
LOADING THE LAUNDRY
1.
Open the appliance door.
2.
The display (J) shows the maximum
load for the programme (MAX) and
the weight of the laundry (KG).
3.
Put the laundry in the drum, one item
at time. Shake the items before you
put them in the drum.
4.
On the display the weight of the laun-
dry updates by steps of kg 0.5. The
weight is indicative and changes with
the type of the laundry.
If you put in the drum more laun-
dry than the maximum load, the
symbols MAX and the value 0.0
start to flash.
You can wash your laundry but the
water and energy consumption in-
crease.
To have the best consumption
and washing performance remove
some items until the symbols stop
to flash.
The overload indication is availa-
ble only for programmes with a
maximum load lower than the ap-
pliance maximum load.
5.
Close the door. The value 0.0 near
the symbol % on the display shows
the quantity of the detergent to use.
This data is indicative and refers to
the detergent quantity for a maxi-
mum load that the manufacturer rec-
ommends.
ENGLISH
17