Quick Guide

START THE APPLIANCE
The display shows the detergent symbol and the
percentage of the detergent to use ( ). To have
PERFECT washing results with MINIMUM energy and
water consumption follow this suggestion.
8 Close the door.
9 Put the detergent and additives in the correct compartment of the
dispenser.
10 Press Start/Pause button to start the washing programme.
11 At the end of the programme the display shows a zero , the
indicator of the Start/Pause button and the door lock symbol go off.
If you set the Rinse Hold function refer to “At the end of the
programme” chapter in the user manual.
The maximum programme load ( ) and the laundry
weight ( ) that you put in the drum appear on the display.
The weight of the laundry updates by step of 0.5 kg.
1 Open the water tap.
2 Connect the mains plug to the mains socket.
3 Press On/Off button to activate the appliance.
ALWAYS ACTIVATE THE APPLIANCE BEFORE LOADING
THE LAUNDRY INTO THE DRUM.
4 Turn the programme knob to set a programme. The programme
indicator goes on.
5 The display shows the default temeprature, maximum spin speed
and the empty indicator bar of the available functions. To change
the default values or to set functions press the corresponding
buttons.
6 If necessary, set the delay start function.
7 Put the laundry in the drum, one item at a time.
1 If you put more laundry than the maximum load, the symbol
flashes. You can wash your laundry anyway but the energy and water
consumption increase.
In any case the overload indication is available only for programmes
with a maximum load lower than the appliance maximum load.
Daily Use
Before First Use
1 Activate the drain system:
put 2 litre of water in the main wash compartment of the detergent
dispenser.
2 Set and start a programme for cotton at the highest temperature
without laundry to remove all possible dirt from the drum and the
tub. Put a small quantity of detergent in the main wash compart-
ment of the detergent dispenser.