User manual

The detergent overdosing comes on at the end of the cy-

cle when the appliance detects too much detergent.

You cannot open the door when this symbol is on.

You can open the door only when the symbol goes off.

If the programme is completed but the symbol stays

on:

• The 'Rinse Hold' function is on.

• There is water in the drum.

The delay start symbol comes on when you set the delay

start function.

• The programme time

When the programme starts, the programme time de-

creases with steps of 1 minute.

• The delay start

When you press the delay start button, the display shows

the delay start time.

•Alarm codes

If the appliance has a malfunction, the display shows

alarm codes. Refer to 'Troubleshooting'.

• The display shows this message for some seconds when:

– You set a function that is not applicable for the pro-

gramme.

– You change the programme while it operates.

• When the programme is complete.

The child safety lock symbol comes on when this device is

activated.

Graphic bars

The empty indicator bar appears only if the related func-

tion is available for the set programme.

The indicator bar fills accordingly to the set functions.

If you make a wrong selection the message Err indicates that the selec-

tion is not possible.

This symbol comes on when you set one of the following

functions:

• Shortened duration

• Extra Quick

The extra rinse symbol comes on when this function is acti-

vated.