User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. INSTALLATION
- 4. PRODUCT DESCRIPTION
- 5. CONTROL PANEL
- 6. DIAL AND BUTTONS
- 7. PROGRAMMES
- 8. SETTINGS
- 9. BEFORE FIRST USE
- 10. DAILY USE - WASHING ONLY
- 10.1 Activating the appliance
- 10.2 Loading the laundry
- 10.3 Filling the detergent and additives
- 10.4 Check the position of the detergent flap
- 10.5 Setting a programme
- 10.6 Starting a programme
- 10.7 Starting a programme with the delay start
- 10.8 The ProSense System load detection
- 10.9 Interrupting a programme and changing the options
- 10.10 Cancelling a running programme
- 10.11 Opening the door - Adding garments
- 10.12 End of the programme
- 10.13 Draining water out after end of cycle
- 10.14 Stand-by function
- 11. DAILY USE - WASHING & DRYING
- 12. DAILY USE - DRYING ONLY
- 13. FLUFF IN THE FABRICS
- 14. HINTS AND TIPS
- 15. CARE AND CLEANING
- 16. TROUBLESHOOTING
- 17. CONSUMPTION VALUES
- 18. TECHNICAL DATA
1
2
10. Close the pump cover.
When you drain the water with the emergency drain procedure, you must activate the drain
system again:
1. Put 2 litres of water in the main wash compartment of the detergent dispenser.
2. Start the programme to drain the water.
15.8 Cleaning the inlet hose and the valve filter
1
2
3
45°
20°
15.9 Emergency drain
If the appliance cannot drain the water,
carry out the same procedure, described
in 'Cleaning the drain pump' paragraph.
If necessary, clean the pump.
When you drain the water with the
emergency drain procedure, you must
activate the drain system again:
1. Put 2 litres of water in the main wash
compartment of the detergent
dispenser.
2. Start the programme to drain the
water.
www.aeg.com44